{"product_id":"vtt-5-6-bar-sensor-kits-bmw-plug-and-play-pre-and-post-throttle-5-bar-58-psi-6-bar-72-psi-map-sensor-kits","title":"VTT BMW Plug and Play Pre AND Post throttle 5-Bar (58 psi), 6-Bar(72 psi) Map Sensor Kits","description":"\u003ch4\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h4\u003e\t\t\u003cp\u003eLooking to up your boost limit on just about any BMW vehicle that runs a 3 or 4-wire BMW map sensor including but not limited to S58, B58, N54, N55, S55, S63, B48, B47, B42, B57, B46? We were too, so we decided to make a very easy plug-and-play kit for 3, and 4-wire BMW map sensors. These kits will allow you to completely replace the 3-wire sensor with one of our sensors, and leave your stock 4-wire in place for IAT sensing. Then our 4-wire harness will move the power, ground, and sensor signal from the factory sensor to our sensor. These sensors have the proper scaling which will allow your tuner to simply change your map sensor scaling in the tune, and the factory ECU will be able to utilize the sensor voltage with no problem. We are offering these in 5 bar (58 psi), and 6 bar (72 psi), and each comes with a plug-and-play harness, and optional fittings for ease of installation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e\u003cb\u003eNote: For the S58\/B58 our Factory style Pre-Throttle map sensor is also 5 bar, and will work fine coupled with the post throttle kit, but the scaling is different, if you want matching Voltages Pre\/Post throttle you can run two of these.\u003c\/b\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures include:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFeatures include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePlug and Play harnesses with no wire splicing\u003c\/li\u003e\n\u003cli\u003eOutput wire for connecting a PI or external controller to your post-throttle map sensor for the most stable signal that is not affected by throttle closure\u003c\/li\u003e\n\u003cli\u003eDifferent fittings are available for your plumbing needs.\u003c\/li\u003e\n\u003cli\u003eCan have matching voltage signals for pre\/post throttle for ease of tuning, and boost reference\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSensor Specs:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e5 bar map sensor. (-1 bar to +4bar)\u003c\/li\u003e\n\u003cli\u003e-14.5 PSI to +58 PSI Absolute pressure sensor\u003c\/li\u003e\n\u003cli\u003e-14.5 PSI = 0.5 Volts, 58 PSI = 4.5 Volts\u003c\/li\u003e\n\u003cli\u003eOutputs 0.5V to 4.5V\u003c\/li\u003e\n\u003cli\u003eInput 5V\u003c\/li\u003e\n\u003cli\u003eAccuracy 0.5% of full scale.\u003c\/li\u003e\n\u003cli\u003eHeavy duty Stainless steel body\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT thread\u003c\/li\u003e\n\u003cli\u003eCompatible with all EFI and data logging systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003e6 Bar Map sensor\u003c\/li\u003e\n\u003cli\u003e-1 bar to +5 bar map sensor.\u003c\/li\u003e\n\u003cli\u003e-14.5 PSI to + 72.5 PSI Absolute pressure sensor\u003c\/li\u003e\n\u003cli\u003e-14.5 PSI = 0.5 Volts, 0 PSI = 1.16 Volts, 72.5 PSI = 4.5 Volts\u003c\/li\u003e\n\u003cli\u003eOutputs 0.5V to 4.5V\u003c\/li\u003e\n\u003cli\u003eInput 5V\u003c\/li\u003e\n\u003cli\u003eAccuracy 0.5% of full scale.\u003c\/li\u003e\n\u003cli\u003eHeavy duty Stainless steel body\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT thread\u003c\/li\u003e\n\u003cli\u003eNot compatible with FAST XFI or HP tuners.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003ePLEASE NOTE: IN SOME SYSTEMS YOUR ECU IS GOING TO BE HARD-CODED TO A CERTAIN BOOST LIMIT, AND YOU WILL NEED TO SPOOF THE SYSTEM INTO THINKING IT'S MAKING LESS BOOST THAN IT IS. WHEN THIS IS THE CASE YOU SIMPLY LOG SENSOR VOLTAGE, AND YOU CAN GET TRUE BOOST THAT WAY. FOR BM3 USERS, CROM2, AND REV2 BOARD WORK PERFECTLY WITH THESE SENSORS, AND NO SPOOFING IS REQUIRED.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eALSO NOTE: SOME PLATFORMS CHANGE THE PIN ORIENTATION AROUND, YOU CAN EASILY UNPIN, AND REPIN THE PLUGS TO MAKE SURE YOU HAVE THE SIGNALS WHERE THEY NEED GO\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cimg\u003e\u003cimg\u003e\u003c\/p\u003e\u003cdiv\u003e\n\u003cimg\u003e\u003cp\u003eB58 Pre-Throttle Install\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003cimg\u003e\u003cp\u003eB58 Post-Throttle Install\u003c\/p\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003cimg\u003e\u003cp\u003eS55 Pre-Throttle Install\u003c\/p\u003e\n\u003c\/div\u003e \u003cp\u003e \u003c\/p\u003e \u003ch4\u003eFeatures\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAdditional information\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\t\t\t\u003ctbody\u003e\n\u003ctr\u003e\t\t\t\u003cth\u003eWeight\u003c\/th\u003e\t\t\t\u003ctd\u003e2 lbs\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\t\u003ctr\u003e\t\t\t\u003cth\u003eDimensions\u003c\/th\u003e\t\t\t\u003ctd\u003e6 x 6 x 6 in\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\t\u003ctr\u003e\t\t\t\u003cth\u003eSensor Choice\u003c\/th\u003e\t\t\t\u003ctd\u003e\u003cp\u003e5-Bar (-14.5-58PSI), 6-Bar -(14.5-72PSI)\u003c\/p\u003e\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\t\u003ctr\u003e\t\t\t\u003cth\u003eHarness Choice\u003c\/th\u003e\t\t\t\u003ctd\u003e\u003cp\u003e3 Wire only (Pre-Throttle B58, S58 etc), 4 Wire only (Post throttle S58, B58, Pre and Post S63TU, S55, etc)\u003c\/p\u003e\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e \u003c\/p\u003e \u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eFeel free to contact us at info@mlperformance.co.uk should you wish to double check!\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003ch4\u003eCompatibility Check\u003c\/h4\u003e\u003cp\u003eTo ensure the part(s) you have ordered fits your vehicle, we run a compatibility check prior to dispatch. We can do this either using your registration number (UK) or the last 7 digits of your VIN. Simply enter your car details prior to checkout.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003ch4\u003ePart Number\u003c\/h4\u003e\u003cp\u003eVTT-5-6-BAR-SENSOR-KITS-5-3 (5-Bar (-14.5-58PSI) \/ 3 Wire only (Pre-Throttle B58, S58 etc))\u003c\/p\u003e\u003cp\u003eVTT-5-6-BAR-SENSOR-KITS-5-4 (5-Bar (-14.5-58PSI) \/ 4 Wire only (Post throttle S58, B58, Pre and Post S63TU, S55, etc))\u003c\/p\u003e\u003cp\u003eVTT-5-6-BAR-SENSOR-KITS-6-3 (6-Bar -(14.5-72PSI) \/ 3 Wire only (Pre-Throttle B58, S58 etc))\u003c\/p\u003e\u003cp\u003eVTT-5-6-BAR-SENSOR-KITS-6-4 (6-Bar -(14.5-72PSI) \/ 4 Wire only (Post throttle S58, B58, Pre and Post S63TU, S55, etc))\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003ch4\u003eMore Information\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eManufactured by\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVegas Turbocharger Technologies\u003c\/p\u003e","brand":"VTT","offers":[{"title":"5-Bar (-14.5-58PSI) \/ 3 Wire only (Pre-Throttle B58, S58 etc)","offer_id":48679217692897,"sku":"VTT-5-6-BAR-SENSOR-KITS-5-3","price":163.29,"currency_code":"USD","in_stock":true},{"title":"5-Bar (-14.5-58PSI) \/ 4 Wire only (Post throttle S58, B58, Pre and Post S63TU, S55, etc)","offer_id":48679217725665,"sku":"VTT-5-6-BAR-SENSOR-KITS-5-4","price":174.79,"currency_code":"USD","in_stock":true},{"title":"6-Bar -(14.5-72PSI) \/ 3 Wire only (Pre-Throttle B58, S58 etc)","offer_id":48679217758433,"sku":"VTT-5-6-BAR-SENSOR-KITS-6-3","price":183.99,"currency_code":"USD","in_stock":true},{"title":"6-Bar -(14.5-72PSI) \/ 4 Wire only (Post throttle S58, B58, Pre and Post S63TU, S55, etc)","offer_id":48679217791201,"sku":"VTT-5-6-BAR-SENSOR-KITS-6-4","price":193.19,"currency_code":"USD","in_stock":true}],"url":"https:\/\/mlperformanceusa.com\/products\/vtt-5-6-bar-sensor-kits-bmw-plug-and-play-pre-and-post-throttle-5-bar-58-psi-6-bar-72-psi-map-sensor-kits","provider":"ML Performance USA","version":"1.0","type":"link"}