{"product_id":"vtt-supra-intake-a90-91-supra-modular-silicone-intake-system","title":"VTT A90\/91 Supra Modular Silicone Intake System","description":"\u003ch4\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/h4\u003e\t\t\u003cp\u003e\u003cstrong\u003eVTT is proud to announce its Modular Silicone\/Billet intake system for the A90\/91 Toyota Supra with the B58TU engine. We invested many hours of testing and fitting this kit to get the best fitment, and highest quality. We are very happy with the results. Full disclosure, the factory intake system as far as the airbox is very good, but the intake tract down to the turbo, is full of twists turns, bellows, etc which can cause flow disruption. It also has a silencer which is a restriction as it bypasses air to quiet the intake sound. By removing all of these, and replacing them with our 3\"-3.5\" Silicone intake tube either to our 6\" cone filter, the stock airbox, or our Carbon Fiber Airbox lid you are removing all of those, and providing a free-flowing optimized air path from the filter or airbox to the turbo. From our testing we found up to 700WHP, the stock airbox is up to the task if the stock appearance and sound is what you wish. Once you go over 700WHP, we suggest stepping up to the 6\" cone with a built-in velocity stack.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe kit is Modular because it can run multiple ways by simply changing the setup slightly\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDifferent options:\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003e\u003cem\u003eIt can run as a full intake system. Our Billet CNC plate attaches to the stock turbo, you run our silicone intake, Billet Maf housing, remove the top of the stock intake box, filter, and run our high flowing 6\" cone filter with a built-in velocity stack in the intake bottom so it is still being fed fresh air. \u003cstrong\u003eSuggested for best intake sound\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eIt can run as an intake system only with no filter. Our Billet CNC plate attaches to the stock turbo, you run our silicone intake, to the stock MAF housing in the factory air box. This removes ALL of the intake restrictions from the turbo up to the airbox and keeps the full fresh air flow, and factory appearance, as well as sound. \u003cstrong\u003eSuggest for builds when stock sound\/appearance is required up to 700WHP\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eIt can run as our Carbin Fiber Intake top, with our high-flow panel filter. Our Billet CNC plate attaches to the stock turbo, you run our silicone intake, to the MAF housing in the VTT CF air box top. This removes ALL of the intake restrictions from the turbo up to the airbox and keeps the full fresh air flow, as well as sound. \u003cstrong\u003eSuggest for builds when stock sound\/appearance is required up to 700WHP\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eThis system works with our \"GC\" turbocharger line and is included with all \"GC\" turbos. No turbo adapter is needed. The silicone inlet will fit directly to the turbocharger inlet, and then can be run either of the two ways above. \u003cstrong\u003eGC, GC-MID either option is fine, for GC+ max-effort builds, we suggest the 6\" cone\u003c\/strong\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eIncluded with the kit depending on how you want to run it:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cem\u003e1 Billet turbo adapter, with stainless hardware (optional)\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e1 Silicone Inlet with two CNC PCV fitting adapters, and clamps\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e1 Billet MAF housing with hardware (optional)\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e1 VTT Carbon Fiber Intake housing\u003c\/li\u003e\n\u003cli\u003e1 VTT High Flow Panel Filter\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e1 High-flow VTT cone filter (optional)\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003ePlease be aware. This system removes the PTC heater, and it WILL register a shadow code in the DME. In our testing, this did NOT throw a check engine light. The code is only there if your scan the car. If you wish to remove the code it must be coded out.\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003ch4\u003eFeatures\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eAdditional information\u003c\/strong\u003e\u003c\/p\u003e\u003ctable\u003e\t\t\t\u003ctbody\u003e\n\u003ctr\u003e\t\t\t\u003cth\u003eWeight\u003c\/th\u003e\t\t\t\u003ctd\u003e7 lbs\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\t\u003ctr\u003e\t\t\t\u003cth\u003eDimensions\u003c\/th\u003e\t\t\t\u003ctd\u003e14 x 14 x 14 in\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\t\t\u003ctr\u003e\t\t\t\u003cth\u003eKit choice\u003c\/th\u003e\t\t\t\u003ctd\u003e\u003cp\u003eComplete kit for stock turbo, Stock turbo kit minus Air Filter\/MAF Housing for stock airbox, MAF\/Filter kit for GC, GC-MID, GC+, Complete kit with Carbon Fiber Intake Lid\u003c\/p\u003e\u003c\/td\u003e\t\t\u003c\/tr\u003e\t\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003e \u003c\/p\u003e \u003ch4\u003eCompatibility\u003c\/h4\u003e\u003cp\u003eFeel free to contact us at info@mlperformance.co.uk should you wish to double check!\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003ch4\u003eCompatibility Check\u003c\/h4\u003e\u003cp\u003eTo ensure the part(s) you have ordered fits your vehicle, we run a compatibility check prior to dispatch. We can do this either using your registration number (UK) or the last 7 digits of your VIN. Simply enter your car details prior to checkout.\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003ch4\u003ePart Number\u003c\/h4\u003e\u003cp\u003eVTT-SUPRA-INTAKE-1 (Complete kit for stock turbo)\u003c\/p\u003e\u003cp\u003eVTT-SUPRA-INTAKE-2 (Stock turbo kit minus Air Filter\/MAF Housing for stock airbox)\u003c\/p\u003e\u003cp\u003eVTT-SUPRA-INTAKE-3 (MAF\/Filter kit for GC, GC-MID, GC+)\u003c\/p\u003e\u003cp\u003eVTT-SUPRA-INTAKE-4 (Complete kit with Carbon Fiber Intake Lid)\u003c\/p\u003e \u003cp\u003e \u003c\/p\u003e \u003ch4\u003eMore Information\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eManufactured by\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eVegas Turbocharger Technologies\u003c\/p\u003e","brand":"VTT","offers":[{"title":"Complete kit for stock turbo","offer_id":48679209763041,"sku":"VTT-SUPRA-INTAKE-1","price":358.79,"currency_code":"USD","in_stock":true},{"title":"Stock turbo kit minus Air Filter\/MAF Housing for stock airbox","offer_id":48679209795809,"sku":"VTT-SUPRA-INTAKE-2","price":262.19,"currency_code":"USD","in_stock":true},{"title":"MAF\/Filter kit for GC, GC-MID, GC+","offer_id":48679209828577,"sku":"VTT-SUPRA-INTAKE-3","price":117.29,"currency_code":"USD","in_stock":true},{"title":"Complete kit with Carbon Fiber Intake Lid","offer_id":48679209861345,"sku":"VTT-SUPRA-INTAKE-4","price":616.39,"currency_code":"USD","in_stock":true}],"url":"https:\/\/mlperformanceusa.com\/products\/vtt-supra-intake-a90-91-supra-modular-silicone-intake-system","provider":"ML Performance USA","version":"1.0","type":"link"}