Millway Motorsport STREET adjustable front topmounts for pre-2015 F80 M3 and F82/F83 M4. These are for vehicles with three M10 fixings rather than five M8 fixings as per later models. These topmounts feature adjustable camber for maximum grip.

These topmounts fit all spring types and allow for up to approx 3.2 degrees of negative camber (24mm of camber adjustment). Street version with polyurethane bushings instead of original uniball version. Dampens noise from tyres etc for OE-like ride quality.

If you like the front end response and grip similar to a racecar this product is for you! In addition to the good driving characteristics, you also save the front tires from being worn on the outer edge. So this camber plates are earned from day one.

NEW! Street version with polyurethane bushings. Reduces noise from suspension and tires compared to uniball version.

This camber plates for the latest 1, 2, 3 and 4-series will fit original suspension and aftermarket suspension. The unique design make it possible to mount springs with OEM size springs or 60mm type springs. (upper spring plate from you suspension kit must then be used). They are the same height as the OEM plates, so they won´t raise or lower your car.

Depending on your damper and damper adjustment knob, it is sometimes necessary to modify the upper rubber protection in the engine compartment. The damper nut supplied from your suspension-kit should always be used.

The roller bearings (upper spring plate) shown in one of the pictures is NOT included. It is only to show how it looks with original spring plate mounted. You have to move them from the original BMW plates to our camber plates.

The adjustment range is 24mm. That is approximatly -2,3 extra camber than OEM. So expect to reach around -3,2 degree of camber on max. (Max camber depends on suspension setup)

Price is for a pair (left and right side)

Please Note: This has 3x M10 threads. If you have an early M models with 5x M8 threads please see ?Millway Motorsport BMW F80 F82 F87 Street Adjustable Front Camber Plates - 5 Bolt (Inc. M2 Competition, M3 & M4).

• Broad adjustment range
  
• Low noise compared to solid mounts
  
• No need for lubrication or rubber seals
  
• Thread inserts with locking function
  
• Fits with most suspensions on the market including OE.

Pros

• No more ruined front tires
• More front end grip.
• Better feedback in the steering wheel

Cons

• More noise from road surface and suspension

• BMW F80 M3 Saloon (2012-2015)
  
• BMW F82 M4 Coupe (2013-2018)
• BMW F83 M4 Convertible (2013-2018)

Please Note: Fits M models manufactured before 2015 with 3x bolt M10 threads.

To ensure the part(s) you have ordered fits your vehicle, we run a compatibility check prior to dispatch. We can do this either using your license plate or the last 7 digits of your VIN. Simply enter your car details prior to checkout.

MW90481-M4-10

Manufactured by

Millway Motorsport